用於實驗室和現場的pH探頭

為了成功測量pH值，選擇合適的pH探頭非常重要。pH電極會影響測量結果。有各種各樣的pH電極適用於不同的應用。基本上，出現了以下問題：我想測量什麼，精度是多少？

您是否想要簡單快速的pH測量，尤其是移動使用？還是回應時間短的高精度？特殊樣品需要特殊的探頭。體積小，性質不同，成分不尋常。在這裏，您可以瞭解有關適當選擇合適的pH電極的更多資訊

WTW -帶溫度感測器的低維護SenTix? pH電極

· 貨號： 103635

WTW  pH電極SenTix41技術參數：

WTW - Low-Maintenance SenTix? pH electrodes with temperature sensor

SenTix?41, 41-3, 42: Standard electrodes with gel electrolyte and built-in temperature sensor for pH measurement in lab and field

?Maintenance-free gel reference system over the entire product life
?Automatic temperature compensation
?Robust plastic shaft
pH electrodes with gel electrolyte and built-in temperature sensor are ideal for portable measurement but also for routine measurement in the lab. We especially recommend these pH electrodes for all applications, where reliable measured values are needed even under the most adverse conditions. They are available with different plugs and cable lengths.
SenTix?41: 1 m fixed cable with DIN plug and 4 mm banana plug
SenTix?41-3: 3 m fixed cable with DIN plug and 4 mm banana plug
SenTix?42: 1 m fixed cable with BNC plug and 4 mm banana plug
The electrodes do not require any maintenance except occasional cleaning and are therefore especially economical.

pH0 ...14 pH              Temperature0 … 80 °C

WTW-帶有溫度感測器的低維護SenTix?pH電極

SenTix?41,41-3,42：帶凝膠電解質和內置電解質溫度感測器的標準電極，用於實驗室和現場無維護凝膠參考系統的pH測量自動溫度補償堅固的塑膠軸pH電極與凝膠電解質和內置的溫度感測器是理想的可攜式測量，但也用於常規測量在lab。我們特別推薦這些pH電極，即使在Z不利的條件下也需要可靠的測量值。它們可配有不同的插頭和電纜e長度。SenTix?41：1m固定電纜與DIN插頭和4mm香蕉插頭SenTix?41-3：3m固定電纜與DIN插頭和4毫米香蕉插頭SenTix?42：1m固定插頭與BNC插頭和4mm香蕉插頭T除了偶爾清洗外，電極不需要任何維護，因此特別經濟。

pH值0 ...14 pH溫度0.... 80 °C